Test Configuration - EXFO MaxTester 635G User Manual

Setting Up DSL/IP Tests

Test Configuration

Test Configuration
The MaxTester supports 3 types of test applications: Auto Test, Manual
Test, and Ethernet Test. Configuration parameters for all 3 test applications
are saved into a test configuration profile. A default profile is provided with
a predefined set of parameters for all test applications.
Select Profile lists saved available profiles. The

current active profile is shown in the upper
information header. At power up, settings are read
from the last loaded profile.
Profile Details lists the 3 types of tests for

configuration:



Copy to USB allows you to copy all profiles found

in the internal memory to an external USB device.
If the profile name already exists in the destination folder, Copy (x) will
be appended to the profile name, where x corresponds to the number
of copies starting from 1.
Copy from USB allows you to copy all profiles found on an external

USB device to the unit.
Delete Profile allows you to delete a profile (except the default profile)

on the unit.
328
Auto Test Setup
Manual Test Setup
Ethernet Test Setup
MAX-635G