EXFO MaxTester 635G User Manual page 319

Multimeter 2 Result
The Multimeter 2 Result page displays the following
results and pass/fail status:
Resistive Balance - R/B-Leg, T/A-Leg, Loop

resistance, and pass/fail status and values in
and %.
Isolation - pass/fail status, Resistance and a Soak

Counter(s) for each wire Pair. If your unit has the
HIVOLT (high voltage) software option
configured, it enables Isolation Resistance
testing up to 500 V. Default is inherited from
Multimeter Isolation test.
Capacitance/Opens and Length for each wire Pair and overall

Capacitive Balance.
Noise Result
The Noise Result page displays the following results
and pass/fail status:
VF Noise measures voice frequency noise in the

line.
VF Impulse Noise - High, Mid, Low counts,

respective detection levels, and Elapsed Time.
Here the pass/fail status is for the Mid level only.
WB Impulse Noise - impulse Count, Detection

Level, and Elapsed Time.
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set
Copper Auto Tests
User Auto Test
Ω
309