Disassembly; Safety - PFT G 4 X FU Series Operating Manual

52 Disassembly

52.1 Safety

Personnel
Basic information
2020-01-07
Mixing pump G 4 X FU 230/400V Overview - Operation
5. Clean the work area and remove any spilled materials such as
liquids, processing material or similar.
6. Ensure that all safety systems of the installation work perfectly.
After the useful service life has been reached, the
device has to be dismantled and disposed of in an
environmental-friendly manner.

Disassembly must be carried out only by specially trained
technical personnel.
 Work on the electrical system must be carried out by qualified
electricians only.
WARNING!
Risk of injury in case of improper disassembly!
Stored residual energies, sharp components, points
or edges at and inside the device or at the required
tools might cause injuries.
Therefore:
 Prior to starting the works ensure that there is
sufficient space.
 Carefully handle components with sharp edges.
 Ensure order and cleanliness at the working place!
Loose components and tools on top of another or
lying about, pose potential accident risks.

Dismantle components correctly. Pay attention to
partly high dead weight of the components. If
required use lifting equipment.
 Secure components that they do not fall down or
fall over.
 In case of doubt, consult the dealer.
Disassembly
67