Mixing pump G 4 X FU 230/400V Overview - Operation
Putting the machine into operation
34 Putting the machine into operation
34.1 Check consistency of mortar
Fig. 54: Consistency test tube
34.2 Start the machine in a "flying" mode (400V)
2
3
Fig. 55: Switching on
Fig. 56: Consistency of mortar
Fig. 57: Switching off
38
1. Connect consistency test tube at the mortar pressure gauge.
2. Place a bucket or pan under the consistency test tube.
Article number: 20104301 Consistency test tube 25m piece
1
1. Turn the selector switch (1) of the booster pump clockwise.
2. Turn the selector switch (2) of the star wheel to position "I".
3. Switch on the machine, turn the selector switch of the pump
motor (3) clockwise.
4. Check consistency of mortar.
5. Switch off the machine at selector switch (position "0").
6. Remove consistency test tube and clean it.
2020-01-07