Work On Troubleshooting; Reaction In The Event Of Faults - PFT G 4 X FU Series Operating Manual

4 3
5
Fig. 74: Power failure

41 Work on troubleshooting

41.1 Reaction in the event of faults

2020-01-07
Mixing pump G 4 X FU 230/400V Overview - Operation
NOTE!
The G 4 X is equipped with a restart interlock. In
case of a power cut, the system has to be started as
follows.
5. Turn main switch (3) to position "I".
6. Press the green push button (4) control voltage "ON".
7. Switch on the air compressor using the green toggle switch.
8. Switch on the machine, turn the selector switch of the pump motor
(5) clockwise.
9. The G 4 X starts again as soon as the air tap at the spray gun is
opened again.
NOTE!
In case of a longer power cut, the G 4 X and the
material hoses have to be cleaned immediately.
The following strictly applies:
1. In the event of faults presenting immediate danger to persons
or property, activate the emergency off function immediately
(switch off main switch).
2. Determine cause for fault.
3. If the rectification of faults requires works in the danger zone,
switch off the system and secure against restarting.
4. Inform the manager on site immediately about the fault.
5. Depending on the type of fault commission authorised skilled
personnel or rectify the fault yourself.
NOTE!
The following fault table gives information on who
is authorised to rectify the fault.
Work on troubleshooting
45