Fig. 53: Injection hood
33 Monitoring the machine
2020-01-07
Mixing pump G 4 X FU 230/400V Overview - Operation
Feeding with injection hood:
Accessory article number 20 60 02 13
Put the delivery hood instead of the grille cover.
DANGER!
Risk of injury at the star wheel!
Do not open the machine during pneumatic
conveying. Before opening, turn off the master
switch and interrupt the power supply.
NOTE!
First feed material to the mixing pump G 4 X. Pull
the dummy connector or switch off the machine
using pressure control air. Start your work only
when the level sensor indicates full.
DANGER!
Access by unauthorised persons!
The machine must be operated only if monitored.
Monitoring the machine
37