47.11 Cleaning the hopper
48 Changing the pump / Cleaning the pump
48.1 Fold up mixing tube
2
1
Fig. 99: Fold up mixing tube
48.2 Clean rubber mixing section
2
Fig. 100: Remove pump unit
Fig. 101: Clean rubber mixing section
2020-01-07
Mixing pump G 4 X FU 230/400V Overview - Operation
Changing the pump / Cleaning the pump
The inside of the hopper can be cleaned with a water hose after
having been emptied completely.
1. Secure the machine against switching on by removing the
connection cable.
2. Loosen locking lever (1).
NOTE!
Ensure that the locking lever engages at the
mixing tube (2).
1
1. Remove water inlet (1) from rubber mixing section.
2
2. Loosen nuts (2).
3
3. Remove pump assembly (3) with pressure flange (4) and
mortar pressure gauge and clean.
4
4. Pull the rubber mixing section out from the hopper and clean it
5. Replace and/or reinstall the rubber mixing section and pump
assembly after cleaning. Ensure proper fit of the parts.
59