Arc Air Parameters Setting (1St Level): Current Setting; Arc Air Parameters Setting (2Nd Level) - Weco Pioneer 403MKS Instruction Manual

Pioneer 403MKS
Pioneer Pulse 403MKS
Welding
HOLD function
(At welding end)

10.7.1 ARC AIR parameters setting (1st level): current setting

○ Using the encoder E1
B
The value is saved automatically.

10.7.2 ARC AIR Parameters Setting (2nd Level)

C
○ Press the button S5
D
○ Scroll down the list of parameters to be edited by pressing buttons S3
○ Using the encoder E3
E
The value is saved automatically.
Exit with confirmation
F
○ Press S2
This action will automatically close the menu.
Tab. 16 - Parameters of the 2nd level menu in ARC AIR mode
PROCE-
PARAMETER
DURE
ARC AIR VRD
WELD THE WORLD
Shows the average current measured
during welding.
Shows the average current measu-
red during the last welding procedure
, edit the current value
to enter the 2nd level menu.
, edit the value of the selected parameter.
.
MIN
(row 1/1) OFF
DISPLAY D1
performed.
DEFAULT MAX
OFF ON
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
DISPLAY D2
Shows the average voltage measured
during welding.
Shows the average voltage measu-
red during the last welding procedure
performed.
and S4
NOTES
.
63