Table of Contents
Advertisement
Pioneer 403MKS
Pioneer Pulse 403MKS
Exit without confirmation
○ Press the S2
Return to the job menu.
○ Press the S2
D
Exit with confirmation
○ Hold down for 3 seconds button S8
Return to the job menu.
○ Press button S8
11.3 LOADING A USER JOB
If using a torch with UP/DOWN buttons you can scroll through the uploaded JOBs.
You can quit the uploaded job with the following methods:
• turn encoders E1 - E2 to change the welding current or voltage.
• press the welding mode selection button (button S6).
• Press the following button:
If there are no JOBS loaded, the UP/DOWN buttons on the torch serve to adjust the welding current.
This function is available when welding mode is not active.
S1
EXIT
D
S2
SELECTION
B
S3
C
S4
SELECTION
○ Hold down button S8
A
The job menu appears in display: D3.
○ Press buttons S3
B
The selected parameter is shown by symbol "
WELD THE WORLD
button.
button to exit.
.
again.
S T O P
L7
E1
D1
D3
SELECTION
to activate the job menu.
and S4
to select parameter OPT.
L4
L8
D2
S8
E3
S5
S6
S7
C
".
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
E2
ACTIVATION
A
S10
D
S9
EXIT
69
Advertisement
Table of Contents
