Table of Contents
Advertisement
Pioneer 403MKS
Pioneer Pulse 403MKS
○ Use the encoder E3
○ Press buttons S3
C
The JOB displayed is the one that was most recently used.
When there are no saved jobs the following message appears on the bottom line: NO JOB
○ Using the encoder E3
Exit without confirmation
○ Press the S2
This action will automatically close the menu
Exit with confirmation
○ Press the S8 button.
The message "CONFIRM JOB ERASURE" appears on display D3.
D
○ Use the encoder E3
○ Press the S8 button.
This action will automatically close the menu
Exit with confirmation
○ Use the encoder E3
○ Press the S8 button.
This action will automatically close the menu
11.5 EXPORTING/IMPORTING JOBs (through a USB memory stick)
By using a USB memory stick, the JOBs saved on the panel can be imported into another panel.
When a USB memory stick is connected, the JOB MENU will display the items related to the importing
and exporting procedure.
WARNING! The JOBs are exported to the USB memory stick with the name of the location
where they are saved on the panel. If the file names of the JOBs saved onto the USB memory stick are
changed by using a PC, after they are imported into the destination panel, they will still be saved in their
original location. This means that, if the destination panel already contains JOBs saved in the same
location as those exported to the memory stick, they will be overwritten.
We recommend not to change the name of the files exported to the USB memory stick. The file
extension (.bin) must never be changed.
JOBs to be kept must be moved in a location of the destination panel different from the location
of the JOBs exported to the USB memory stick.
To be usable, the memory stick must be formatted as FAT32.
11.6 EXPORTING A JOB
WELD THE WORLD
, to select the DELETE function.
and S4
to select parameter JOB.
, select one of the jobs displayed.
button.
, to select the NO function"
, to select the NO function"
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
71
Advertisement
Table of Contents
