Deleting A Job - Weco Pioneer 403MKS Instruction Manual

Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
○ Use the encoder E3
○ Press buttons S3
C
The JOB displayed is the one that was most recently used.
When there are no saved jobs the following message appears on the bottom line: NO JOB
○ Using the encoder E3
Exit without confirmation
○ Press the S2
This action will automatically close the menu
D
Exit with confirmation
○ Press the S8 button.
This action will automatically close the menu

11.4 DELETING A JOB

This function is available when welding mode is not active.
S1
EXIT
D
S2
SELECTION
B
S3
C
S4
SELECTION
○ Hold down button S8
A
The job menu appears in display: D3.
○ Press buttons S3
B
The selected parameter is shown by symbol "
70
WELD THE WORLD
, to select the LOAD function.
and S4 to select parameter JOB.
, select one of the jobs displayed.
button.
S T O P
L7
E1 D1
D3
SELECTION
to activate the job menu.
and S4 to select parameter OPT.
L4 L8
D2
S8
E3
S5 S6 S7
C
D

".
Pioneer 403MKS
Pioneer Pulse 403MKS
E2
ACTIVATION
S10
S9
EXIT
A
D