Operating Hour Counter; Service Menu - Weco Pioneer 403MKS Instruction Manual

Pioneer 403MKS
Pioneer Pulse 403MKS
Cooler activation
- ON= The cooler is always running when the power source is switched on. This mode is preferable
for heavy duty and automatic welding procedures.
- OFF= The cooler is always disabled because an air-cooled torch is in use.
- AUT= When the unit is switched on the cooler is switched on for 15 s. During welding procedures
the cooler runs constantly. When welding is terminated the cooler continues to run for 90 s plus
a number of seconds equivalent to the average current value shown using the HOLD function.

6.1 OPERATING HOUR COUNTER

The menu page shows the processing hour counters.
• POWER ON = Total number of hours the machine has been on (mains powered).
• T.ARC ON = Total number of hours of welding arc on.
• P.ARC ON = Partial number of hours of welding arc on.
SET UP
POWER ON
T. ARC. ON
P. ARC ON

6.2 SERVICE MENU

S1
EXIT
E
S2
SELECTION
S3
B D
S4
VISUALIZATION
○ Press and hold down the key S5
A
WELD THE WORLD
7/10
7h 11'
2h 10'
2h 20'
S T O P
L7
E1 D1
D3
SELECTION
for 3 seconds (SET UP with machine on).
L4 L8
D2
S8
E3
S5 S6 S7
A
ACTIVATION
C
CONFIRMA-
TION
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
E2
S10
S9
25