Set-Up (Initial Set-Up Of The Welding Power Source) - Weco Pioneer 403MKS Instruction Manual

Pioneer 403MKS
Pioneer Pulse 403MKS
6

SET-UP (INITIAL SET-UP OF THE WELDING POWER SOURCE)

With locked status active it is not possible to access this function.
§ "6.4 LOCKING PROCEDURE".
S1
EXIT
D
S2
S3
B
S4
SELECTION
SET UP at machine power on
○ Set the welding power source ON/OFF switch to "O" to switch the unit off.
○ Set the welding power source ON/OFF switch to "I" to switch on the unit.
○ Simultaneously press button S5
A
wording "PROGRAM UPDATE" appears on the following display: D3 ]
SET UP X/Y : The message will appear for a few seconds on display D3.
- X = number of the currently displayed menu page.
- Y = total number of menu pages.
○ Press buttons S3
B
- Activation of the ADJUSTMENTS BLOCK calls for a specific procedure.
- § "6.4 LOCKING PROCEDURE".
C
○ Using the encoder E3
○ Press S2
D
- The unit restarts with the power-up procedure..
WELD THE WORLD
L7
E1
D3
SETTING
[
and S4 to scroll down the list of settings to edit.
, edit the value of the selected setting.
to save the setting and quit the menu.
S T O P
L4 L8
D1 D2
S8
E3
S5 S6
C A
ACTIVATION
This operation must be carried out before the
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
E2
S10
S9
S7
23