Mma Welding; Mma Parameters Setting (1St Level): Welding Current Setting; Mma Parameters Setting (2Nd Level) - Weco Pioneer 403MKS Instruction Manual

Pioneer 403MKS
Pioneer Pulse 403MKS

10.6 MMA WELDING

SETTING
B
S1
EXIT
F
S2
S3
D
S4
SELECTION
A
S6
This button serves to select the following welding mode: MMA
MODE MODE
Tab. 13 - Main settings and displays in MMA mode
Data setting
Welding
HOLD function
(At welding end)

10.6.1 MMA Parameters Setting (1st Level): welding current setting

○ Using the encoder E1
B
The value is saved automatically.

10.6.2 MMA Parameters Setting (2nd Level)

C
○ Press the button S5
WELD THE WORLD
S T O P
L7
E1 D1
D3
SETTING
DISPLAY D1
Shows the preset welding current
Shows the average current measured
during welding.
Shows the average current measu-
red during the last welding procedure
performed.
, edit the value of the welding current.
to enter the 2nd level menu.
L4 L8
D2
S8
E3
S5 S6 S7
E C A
SELECTION
SELECTION
DISPLAY D2
Shows the tension between the wel-
ding sockets.
Shows the average voltage measured
during welding.
Shows the average voltage measu-
red during the last welding procedure
performed.
Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
E2
S10
S9
61