Jobs Management; Saving A Job - Weco Pioneer 403MKS Instruction Manual

Cod. 006.0001.2230
02/09/2020 V.1.0
ENGLISH
11

JOBS MANAGEMENT

Personalised welding settings, or JOBs, can be saved in memory locations and subsequently uploaded.
Up to 99 jobs can be saved (j01-j99).
The settings of the SETUP menu are not saved.

11.1 SAVING A JOB

This function is available when welding mode is not active.
S1
S2
B
S3
C
S4
SELECTION
○ Hold down button S8
A
The job menu appears in display: D3.
○ Press buttons S3
B
The selected parameter is shown by the following symbol "
○ Use the encoder E3
○ Press buttons S3
The first free memory location is displayed.
If all the memory locations are occupied, the word JOB flashes and the first JOB is dis-
played.
C
If the memory location is already occupied by another job, when a new JOB is written to
the location it will overwrite the existing JOB.
The names of unnamed jobs are "-" after a space following the number corresponding to
the memory location by default
§ "11.2 NAMING JOBS".
66
WELD THE WORLD
S T O P
L7
E1 D1
D3
to activate the job menu.
and S4 to select parameter OPT.
, to select the SAVE function.
and S4 to select parameter JOB.
Pioneer Pulse 403MKS
L4 L8
D2
S8
E3
S5 S6 S7
C
SELECTION
 ".
Pioneer 403MKS
E2
ACTIVATION
A
S10
S9