Standalone; Wall Mounting; Plug-In Modules; Power Source - Teldat M8-Smart Installation Manual

3 Components and Power Supply
Rack anchor bolts
Fig. 22:

3.3.1 Standalone

M8-Smart devices can be placed as standalones on a flat, stable surface. The adhesive rubber feet must be stuck to
the underside panel to prevent the router from sliding.
Make sure there is enough space around the router (for ventilation purposes) and check that the power cord and
data cables can easily reach it.

3.3.2 Wall mounting

The M8-Smart cannot be mounted on a wall.

3.4 Plug-in Modules

The M8-Smart does not have plug-in modules.

3.5 Power Source

The M8-Smart router is powered through an external AC/DC power adapter.
Warning
The equipment must be used with the power supply provided by the manufacturer.
Workplace conditions. Main characteristics
• Avoid humid and/or dusty locations.
• Direct exposure to sunlight and other heat sources should be avoided. The device should not be placed amongst
papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed close to strong electromagnetic fields (such as speakers, engines, etc.).
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
12
Connecting on page 13 andDisconnecting
Teldat S.A.
on page 13.
M8-Smart