Configure Pri, Pri2 And Dpnss Routes; Configuring Pri Trunk Routes Using Ld 16 - Avaya Communication Server 1000 Installation And Commissioning Manual

Configure PRI, PRI2 and DPNSS routes

Configuring PRI trunk routes using LD 16

Block data required for PRI T1 trunks. The example given in
page 95 is specific to NI2 interface; however, the PRI trunk route is also supported on other
PRI interface types.
Configuring PRI trunk routes using LD 16
1. Log on to the CS 1000E.
2. To access LD 16, enter:
3. Enter the responses shown in
Media Gateway 1000E PRI Gateway Installation and Commissioning
Prompt Response
SLP mc mt oc ot
... ...
OSG1 nnnM
... ...
OSG2 nnnS
... ...
LD 16
Table 27: PRI route (LD 16)
Prompt Response
REQ aaa
TYPE RDB
CUST xx
ROUT 0 - 511
... ...
TKTP xx
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
Configure E1/T1 ports on a Call Server
Description
Slip count.
Out-of-Service Guard time Group 1.
Out-of-Service Guard time Group 2.
on page 95 describes how to configure Route Data
Table 27: PRI route (LD 16)
Description
Request (aaa = CHG, NEW)
Route Data Block.
Customer number, as defined in LD 15.
Route number. Range the same as for Large
System and CS 1000E system.
Trunk type.
Digital trunk route.
Select a digital trunk type of 2.0 Mb/s PRI.
Integrated Services Digital Network.
ISDN PRI route.
NI-2 TR-1268 interface type.
Table 27: PRI route (LD 16)
on page 95.
March 2013
on
95