Avaya Communication Server 1000 Installation And Commissioning Manual page 76

Configure the Media Gateway Controller and DSP daughterboards in a PRI Gateway
3. Enter the IP address, zone number, and the Media Gateway type (in this case, a
4. Click Submit.
5. Enter the Gateway IP addresses and Voice LAN (TLAN) IP addresses for both IPv4
76 Media Gateway 1000E PRI Gateway Installation and Commissioning
Figure 16: Add IPMG
Media Gateway Controller). When you select MGC, the remaining fields
automatically fill in ("CE", "E1", "E", "CT", "T2", and "T"). Click Submit.
Note:
You must configure the DSP Daughterboard 2 same as DSP Daughterboard 1.
and IPv6. Global unicast IPv6 addressing is the only supported IPv6 address type.
For the DSP daughterboards connected, select the type and enter the IP addresses
(IPv4 or IPv6).
After configuration of the MGC is complete, the window shown in
Gateways on page 77 appears.
Comments? infodev@avaya.com
Figure 17: Media
March 2013