ELAN and TLAN subnet connections
An MGC installed in the PRI Gateway requires both ELAN subnet and TLAN subnet
connections. These procedures are the same as for the Avaya CS 1000 MG 1000E (Avaya
MG 1000E) with the MGC. For a full description of connecting Avaya Communication Server
1000E (Avaya CS 1000E) system components, see Avaya Communication Server 1000E
Installation and Commissioning (NN43041–310).
Connect a Media Gateway Controller to the ELAN subnet
Follow the steps in
to connect an MGC to the ELAN subnet.
Connecting a Media Gateway Controller to the ELAN subnet
1. Connect a standard CAT5 patch cable to the ELAN network interface on the
2. Connect the other end of the standard CAT5 patch cable to an RJ-45 ELAN network
Connect a Media Gateway Controller to the TLAN subnet
Follow the steps in
to connect an MGC to the TLAN subnet.
Connecting a Media Gateway Controller to the TLAN subnet
1. Connect a standard CAT5 patch cable to the TLAN network interface on the
2. Connect the other end of the standard CAT5 patch cable to an RJ-45 TLAN network
Connect a Media Gateway Controller to the E1/T1 card
Follow the steps in
to connect the MGC to the E1/T1 card.
Connecting a Media Gateway Controller to the E1/T1 card
1. Connect a RJ-45 shielded Ethernet cable to the ELAN connection.
2. Connect the RJ-45 shielded Ethernet cable to the CE ports on the MGC.
Media Gateway 1000E PRI Gateway Installation and Commissioning
Connecting a Media Gateway Controller to the ELAN subnet
adaptor.
interface on the Layer 2 switch.
Connecting a Media Gateway Controller to the TLAN subnet
adaptor.
interface on the Layer 2 switch.
Connecting a Media Gateway Controller to the E1/T1 card
ELAN and TLAN subnet connections
on page 67
on page 67
on page 67
March 2013
67