Avaya Communication Server 1000 Installation And Commissioning Manual page 105

Configure LAN parameters
A logon prompt appears following power-up. You can now configure the LAN parameters. See
Entering LAN parameters
Entering LAN parameters
1. To log on to the CLI, enter the command:
2. Press enter for the password.
3. To move to the system administration directory, enter the command:
4. Enter the command:
5. Enter the command:
6. Fill in the fields with the values shown in
7. To save the values, enter this command:
8. To restart the card, when you see the prompt Restart the card?, enter this
Media Gateway 1000E PRI Gateway Installation and Commissioning
on page 105.
admin
The system displays the current directory (/ root directory).
cd sadmin
The system displays the /sadmin directory.
system
The system displays the system attributes and prompts you to modify, save, or
cancel.
m
Values entered must match your network configuration.
Table 32: LAN Parameters
Field
system name:
report aging days: 5
subnet mask: 255.255.255.0
ELAN gateway address: 1.1.1.1
ELAN IP address: 1.1.1.124
s
The system saves the attributes and prompts you to restart the card.
command:
Initial configuration of the E1/T1 card
Table 32: LAN Parameters
Enter this value
(e.g.) first-MGP
(e.g.) 14
(e.g.) 255.255.255.0
(e.g.) 141.226.128.254
(e.g.) 141.226.128.172
on page 105.
March 2013 105