Discover The Camera And Configure For Networking - FLIR Elara FR-345-EST Installation And User Manual

Hide thumbs Also See for Elara FR-345-EST:
Table of Contents

Advertisement

Installation
Make sure the camera and the PC you are using to configure the camera are on the same LAN
segment.
2. Connect the alarm connectors, if needed.
3. If using an external DC or AC power supply, connect its wires to the two-pin terminal block system
cable's two-pin power connector.
For more information about the camera's connections, see
2.5.2
By default, DHCP is enabled on the camera and a DHCP server on the network assigns the camera an IP
address. If the camera cannot connect to a DHCP server, the camera's default IP address is
192.168.0.250.
If the camera is managed by FLIR's Horizon or Meridian VMS and the VMS is configured as a DHCP
·
server, the VMS automatically assigns the camera an IP address.
If the camera is managed by FLIR's Latitude VMS or is on a network with static IP addressing, you can
·
manually specify the camera's IP address using the DNA tool or the camera's web page.
To configure the camera for networking using the DNA tool:
1. Run the DNA tool (DNA.exe) — version 2.3.0.19 or higher — by double-clicking
appears, showing compatible devices on the VLAN and their current IP addresses.
In the DNA Discover List, verify that the camera's status is Online.
If this is the first time you are configuring the camera or if it is the first time after resetting the camera
to its factory defaults, DNA automatically authenticates the camera with the default password for the
camera's admin user (admin).
If the admin user password has been changed, you need to authenticate the camera.
In the DNA Discover List, right-click the camera and select Login. In the DNA - Login window, type
the password for the admin user. If you do not know the admin user password, contact the person
who configured the camera's users and passwords.
Click Login, wait for
1.800.561.8187

Discover the Camera and Configure for Networking

Ok status to appear, and then click Close.
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
Hardware
Description.
information@itm.com
.com
. The Discover List
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elara 427-0108-00-00

Table of Contents