Table of Contents
Advertisement
Configuration
Both cameras' focus is fixed at one meter (39.4") and the camera uses digital zoom to adapt the visible
camera's field of view (FOV) to the thermal sensor's FOV.
4.8
Firmware & Info Page
On the Firmware & Info page, you can:
Specify a unique name for the camera
·
Upgrade the camera's firmware
·
Reset the camera to its factory defaults
·
Reboot the camera
·
Enable logs, define a log level, and download system information
·
Enable the compatibility mode for legacy VMS versions
·
Define whether the camera is mounted upright or at a 90° angle
·
Change the camera's video format
·
To apply any change to settings on the Firmware & Info page, click Save. Applying these changes
requires rebooting the camera. To restore previously saved settings, click Discard Changes.
1.800.561.8187
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
.com
information@itm.com
41
Advertisement
Table of Contents
