Table of Contents
Advertisement
Installation
Configuration task
Enable or disable the camera's alarms
Enable and configure external I/O devices
Adjust the camera's live video and video stream
settings
Adjust the camera's visible video settings
Adjust the camera's thermal video settings
Adjust the camera's EST screening settings
Enable and adjust the camera's OSD settings
Enable and configure the camera's full-screen
which includes:
picture-in-picture
·
locking the camera web page in full-screen mode
·
Many of these configuration tasks can be performed before or after mounting the camera, but some of
them can or should only be performed after
2.9
Attach the Camera to a Supported VMS
After you have mounted the camera and discovered or defined its IP address, you can use VMS
Discovery/Attach procedures to attach the camera to a supported VMS.
1.800.561.8187
mode,
mounting and connecting
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
.com
Camera's default admin user
or any user assigned the
admin or expert role
•
•
the camera.
information@itm.com
Any user
•
•
•
•
•
•
14
Advertisement
Table of Contents
