Grasshopper3 Pge Installation; Before You Install; Will Your System Configuration Support The Camera; Do You Have All The Parts You Need - FLIR GRASSHOPPER 3 Series Technical Reference

2

Grasshopper3 PGE Installation

2.1

Before You Install

2.1.1

Will your system configuration support the camera?

Recommended System Configuration
Operating
System
Windows,
Linux (32- or
64-bit)
2.1.2

Do you have all the parts you need?

To install your camera you will need the following components:
Ethernet cable (see
n
8-pin GPIO cable (see
n
Powered Ethernet switch or Ethernet power injector (if using PoE)
n
C-mount Lens (see
n
Tripod adapter (optional) (see
n
Interface card (see
n
FLIR sells a number of the additional parts required for installation. To purchase, visit our
2.1.3

Do you have a downloads account?

Our downloads page has many resources to help you operate your camera effectively, including:
Software, including Drivers (required for installation)
n
Firmware updates and release notes
n
Dimensional drawings and CAD models
n
Documentation
n
To access the downloads resources you must have a downloads account.
1. Go to our website: www.flir.com/iis.
2. In the upper right corner, click Register.
3. Complete the form, then click Register.
After you submit your registration, you will receive an email with instructions on how to activate your account.
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
CPU RAM Video
3.5 GHz or 128
2 GB
equivalent MB
Interface Cables)
General Purpose Input/Output
Lens Mounting )
Mounting with the Case or Mounting
Interface Card)
Grasshopper
2 Grasshopper3 PGE Installation
Ports
PCIe 2.0 compatible host
controller with Ethernet
connector
(GPIO))
Bracket)
®
3 PGE Technical Reference
Software
Microsoft Visual Studio 2010 (to
compile and run example code using
FlyCapture)
Accessories page.
6