Table of Contents
Advertisement
Operation
View Settings page for users assigned the admin or expert role
System Settings
Users assigned the admin or expert role can click System Settings to configure the camera. For more
information, see Configuration.
Live Video
You can select to view visible (V) or thermal (T) live video images.
The camera supports two visible video streams (V1 and V2). When V is selected for live video on the
camera web page, images from the V1 stream appear. By default, the EST screening overlay is enabled
and appears in the live video when V is selected. You can change this setting on the
Screening
Page.
Also, when the camera's on-screen display (OSD) is enabled for the V1 stream on the
OSD
Page, the
OSD appears in the live video image.
You can also set the Live Video Refresh Rate between 1-30 image frames per second (FPS).
The view selected and the Live Video Refresh Rate setting only affect the live video; they do not affect
the camera's video streams.
Full Screen
The Elara FR-345-EST camera web page supports full-screen mode in browsers. Clicking
enables
full-screen
mode. Enabling your browser's full-screen mode does not enable or disable the camera web
page's full-screen mode.
Other Options
Additional choices are for Help and Logout.
3.3
Video Page
The camera provides three video streams: two visible streams (V1 and V2) and one thermal stream (T1).
Video streams are available for viewing using a client program or third-party ONVIF systems.
427-0108-00-10 - Revision 100 - December 2020
16
1.800.561.8187
information@itm.com
This document does not contain any export-controlled information.
www.
.com
Advertisement
Table of Contents
