Table of Contents
Advertisement
Configuration
Firewall Settings
For enhanced security, the camera has a firewall that you can enable by clicking On. By default, when
you enable the firewall, the following services are set to Allow, which means they remain enabled and
their default ports remain open:
SSH
·
FTP
·
RTSP
·
UPNP
·
To disable a service and its default port, click Block.
Caution
Disabling services and ports can affect product functionality.
4.7
Boresight Page
Use the controls and settings on the Boresight page to align the visible video image with the thermal
video image.
Changing the settings on the Boresight page immediately affects the live video and video streams. To
save these changes, click Save. To discard changes and restore previously saved settings, click Discard
Changes.
1.800.561.8187
Nexus Discovery
·
Nexus SDK
·
TRK
·
ICMP
·
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
.com
information@itm.com
40
Advertisement
Table of Contents
