Table of Contents
Advertisement
Operation
For external I/O connections, set the current state
·
for the input and output pins, as shown at right.
You can configure the external I/O connections,
including the number of external input and output
pins, on the
The camera immediately applies changes to settings on the I/O page. To save those changes, click
Save. To discard changes and restore previously saved settings or the factory default settings, click
Reset.
3.7
Screening Page
The camera's screening function detects elevated skin temperatures
by measuring the temperature of the skin around the tear duct (the
canthus). You can enable, disable, or adjust the following screening
settings:
Screening Enable—Enables the camera's temperature screening.
·
The default setting is On (enabled).
Overlay Enable—Enables the screening overlay in the live video
·
on the camera's web page. The default setting is On (enabled).
Display Temperature—Enables the detected temperature in the
·
live video on the camera's web page. The default setting is On
(enabled).
Face Covering Detection—Enables the camera's face covering
·
detection feature. Select one of the following:
o Off (default)
o No Face Covering Alert—When the camera detects a person being screened is not wearing a face
covering and is not attempting to fool the camera by covering his or her face with another object, it
generates an on-screen alert, but does not take any other action.
o No Face Covering No Entry—Effective when the camera is installed with an entry control system
and is properly configured on the System Settings Alarm and I/O Devices pages. When the camera
detects a person being screened is not wearing a face covering and is not attempting to fool the
camera by covering his or her face with another object, it generates an on-screen alert and triggers
an alarm output signal that the access control system uses to prevent entry.
The camera immediately applies changes to settings on the Screening page, affecting the live video
images and streams. To save those changes, click Save. To discard changes and restore previously
saved settings or the factory default settings, click Reset.
1.800.561.8187
I/O Devices Page
in System Settings.
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
information@itm.com
.com
25
Advertisement
Table of Contents
