Visible Page - FLIR Elara FR-345-EST Installation And User Manual

Operation
If more than one camera is providing multicast streams on the network, make sure the Destination
Network IP address is unique for each camera (the Destination Port can be reused). By default, the port
assignment is unique per stream.
The time-to-live field controls the ability of IP packets to traverse network boundaries. A value of 1
restricts the stream to the same subnet. Greater values allow increasing access between networks.
The video streaming uses a protocol generally referred to as RTP, the real-time transport protocol,
although there are actually a number of protocols involved, including the Real-Time Streaming Protocol
(RTSP). The video stream URLs incorporate the IP address of the camera. Using the camera's default IP
address, the complete URLs are:
Visible 1—rtsp://192.168.0.250:554/stream1
·
Visible 2—rtsp://192.168.0.250:554/stream2
·
Thermal 1—rtsp://192.168.0.250:554/stream3
·
To maintain compatibility with legacy systems, the stream names are aliased as: ch0 = stream1, ch1 =
stream2, and ch2 = stream3.
Accessing any of the camera's video streams requires authentication. You can use the name and
password for any of the camera's users. See
3.4

Visible Page

1.800.561.8187
Visible 1
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www.
Visible 2
Users Page.
.com
Thermal 1
information@itm.com
18