FLIR Elara FR-345-EST Installation And User Manual page 46

Configuration
Name
Specify a unique, friendly name for the camera, using only alphanumeric characters. The default name
for the camera is the camera model followed by the camera's serial number.
To upgrade the camera's firmware:
1. Make sure the camera has been recently rebooted.
2. Under Upgrade version, click Find file.
3. On your computer or network, browse to and select the firmware file.
Caution
Only upgrade firmware developed for the Elara FR-345-EST camera.
4. Click Upgrade.
The camera uploads and installs the firmware, which takes a minute or two. After installing firmware, the
camera requires a reboot. When prompted, confirm rebooting the camera.
Factory Defaults
Click Full Reset to return the camera its original factory configuration.
Click Partial Reset to keep the current settings on the Network page and return all other settings to their
factory defaults.
Click Reboot to cause the camera to power cycle and reinstall configuration files.
Tip
You can also return the camera to its original factory configuration by pressing the camera's physical
Default button for at least six seconds; for example, if you are unable to access the camera via its web
page or other communication method. The Default button is located on
Support System Info
Set the logging detail up to four levels; higher log levels increase the size of the log file.
Click Download to retrieve the camera's log files.
Other Settings
Installation Mode—If the camera is installed at a 90° angle, select Rotation 90. Otherwise, make sure
Rotation 0 is selected.
Video Format—The visible camera shutter speed can be synchronized to the 50 Hz or 60 Hz power
used for lighting the scene. If lighting is connected to 50 Hz power, the PAL setting might provide better
video. Under 60 Hz lighting, NTSC might provide better video.
For legacy VMS versions, enable the compatibility mode.
1.800.561.8187
427-0108-00-10 - Revision 100 - December 2020
This document does not contain any export-controlled information.
www. .com
the camera's connector panel.
information@itm.com
42