Meter Setting - Alpha ESS Storion-SMILE-T10 Installation Manual

2.4.3

Meter setting

2.4.3.1 ADL3000
Step 1: The initial interface of the
meter (normal working interface) is
as shown below:
Step 3: Click the "Enter" button to
enter the following interface, and
press the up and down arrow keys to
enter the password 0001;
Step 5: Click the "Enter" button again
to enter the address interface:
Step 7: Click the "Enter" button and
the address setting is completed.
Step 2: Click the "SET" button to enter
the password interface:
Step 4: Click the "Enter" button and
the password input is completed.
Step 6: Click the "Enter" button to
enter the following interface, press the
up and down arrow keys to set the
meter address, the Grid meter (DC, AC
and Hybrid system) address is set to
001, and the PV meter (AC and Hybrid
system) address is set to 002.
Step 8: Click the "SET" button to enter
the following interface:
40 / 55