Alpha ESS Storion-SMILE-T10 Installation Manual page 47

Figure 51 System Mode Setting Interface
Step 10: Click Function-System Mode to
set system mode: DC, AC, Hybrid.
Figure 53 Force Charge Setting Interface
Step 12: If you want to use force charge,
set Enable here.
Figure 55 Force Charge End Time Setting
Step 14: Set the charge start time
Figure 57 Discharging cut-off SOC
Setting
Step 16: Set the discharging cut-off
SOC.
Figure 52 Work Mode Setting Interface
Step 11: Click the mode then set up
work mode.(self-use or force time
charge)
Figure 54 Force Charge Start Time
Step 13: Set the charge start time
Figure 56 Charging cut-off SOC Setting
Step 15: Set the charging cut-off SOC.
Figure 58 Safety Setting Interface
Step 17: Click Safety in the setting
menu. Set safety standard.
ARN4105 for Germany, CEI0_21 for Italy,
G83_2 for Great Britain, AS4777 for
Australia
46 / 55
Setting