Alpha ESS Storion-SMILE-T10 Installation Manual page 32

Figure 28 Connection of the Power Cables and AC Auxiliary Cable
Step 4: Please connect one DC power cable from INV+ port on HV50056 to BAT+
port on SMILE-T10-INV, and the other DC power cable from INV- port on HV50056 to
BAT- port on SMILE-T10-INV. One side of the AC auxiliary power cables should be
connected to the AC auxiliary port on HV50056 and another side should be
connected to the distribution box, as shown in Figure 28.
Figure 29 Connection of the Communication Cables on the Inverter Side
Step 5: Connect the communication cable between HV50056 and the inverter, take
the inverter's own net cable out. First remove the cover, then pass the net cable
through the waterproof cap, sealing ring and connector, connect to the
31 / 55