Alpha ESS Storion-SMILE-T10 Installation Manual page 26

Step 8: Fix the bracket A of the inverter on the rear bracket of HV50056 with the
flange nuts, as shown in Figure 18.
The bottom of the bracket A shall be placed at the same horizontal line with the rear
bracket of HV50056.
Figure 21 Installation of the Bracket A of the Inverter
Step 9: Fix the inverter B bracket as shown in Figure 20.
1 Find the positioning point and mark it.
2 Use the impact drill (drill φ10.0mm, length 20cm) to directly drill the hole in the
marking position, the depth of the hole is about 7cm.
Figure 20 Fixing of the Rear Bracket of HV50056
25 / 55