Alpha ESS Storion-SMILE-T10 Installation Manual page 35

Step 9: DIP switch defines the ID address of each battery in one cluster. Set the DIP
switch of the nearest battery from the HV50056 to the farthest battery in sequence of
1 to N. N is the number of the batteries, which is min. 4 and max. 8.
Note: There should be no same ID number in one cluster.
Step 5: After wiring, please open the front cover of HV50056 and turn on the molded
case circuit breaker.
Figure 34 Turning on the Switch
Figure 35 Installation of the front panels
34 / 55