Removing Shipping Materials - Canon MultiPASS C555 User Manual

Removing Shipping Materials

The MultiPASS has been packed with protective material to protect it during shipping.
Remove this material as follows and keep it in case you need to transport the unit in
the future:
1 Remove the
shipping tapes
from the top of
the MultiPASS.
4 Remove the
shipping tape
and protective
piece from the
output tray.
6 Open the operation panel
partially by gently pulling it
toward you (it only opens
slightly). Then remove the
protective sheet from the ADF.
Close the operation panel by
pressing it down from the
center until it locks into place.
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
2-4
Setting Up
2 Remove the
protective piece
from the multi-
purpose tray.
5 Open the document tray, then remove the
shipping tapes and protective sheets.
7 Open the printer cover, then remove
the shipping tape from the side of the
unit.
Close the printer cover and document
tray.
Remove the
3
shipping tape
and protective
piece from the
bottom of the unit.
Chapter 2