Rear Storage Compartment - BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual

CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2006-008-011_a
2-UP MODELS
1. Seat latch
Seat Removal
Push latch forward while gently lifting
rear of seat. Pull seat rearward. Con-
tinue lifting movement until you can
release the front retaining device then
completely remove seat.
Seat Installation
Insert front tabs of seat into frame
hooks. When seat rests in its posi-
tion, firmly push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
V07L05Y
1. Insert these tabs in hooks
2. Hooks
______________
86
1
2
WARNING
It is of the upmost importance
for the operator's safety that you
confirm that the operator's seat
is properly locked in position by
pulling back and up several times.
19) Rear Storage
Compartment
Convenient location to carry personal
articles such as a spare spark plugs,
first aid kit, etc.
To open the panel, unlatch, lift then re-
move it completely if necessary.
The compartment is equipped with
a drain plug. Remove plug to allow
draining when necessary. Reinstall
plug when finished.
vmo2008-019-012_a
TYPICAL — 1-UP MODELS
1. Rear storage compartment cover
2. Latch
WARNING
When engine is running, always
engage the PARK position on the
shift lever before opening cover.
Never leave any heavy or loose
breakable objects in the storage
basket. Always latch cover be-
fore riding. If storage cover is re-
moved to provide greater carrying
area, ensure that cargo is secured
and will not "fly out" when riding
at speed on rough terrain. Slow
down.