12-Volt Power Outlet; Ignition Switch - BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual

vmo2008-001-020_f
1. Fuel level display
2. Low fuel indicator lamp
Indicator Lamps
NOTE: Use in conjunction with
PLAY 3 (MODE/MESSAGE) MES-
SAGES TABLE
tion regarding messages.
vmo2008-001-020_k
1. Parking brake indicator lamp
2. 4WD indicator lamp
3. Low fuel level indicator lamp
4. Check engine indicator lamp
5. High beam indicator lamp
for additional informa-
Description:
Parking brake is activated.
4WD system is activated.
Low
is
(.5 U.S. gal.) of fuel left in
the fuel tank.
Check engine and D.E.S.S.
system operation.
High headlight beam position
selected.
DIS-

11) 12-Volt Power Outlet

The 12-volt power outlet is located on
the central panel near steering column.
Convenient for handheld spotlight or
other portable equipment.
Remove protective cap to use. Always
reinstall it after use to protect against
weather.
Do not exceed the rating capacity. Re-
SPECIFICATIONS
fer to
vmo2008-019-047_a
1. 12-volt power outlet
2. Protective cap

12) Ignition Switch

The ignition switch is located on the
central panel near steering column.
_______________
CONTROLS/INSTRUMENTS/EQUIPMENT
fuel level.
approximately
There
2.0 L
subsection.
81