V06G0RY
TYPICAL
Lift and hold the spindle then remove
the bulb.
V06G0SY
TYPICAL
Properly reinstall removed parts in the
reverse order of their removal.
Headlight Beam Aiming
Adjust beam aiming as follows:
Turn adjustment screws to adjust
beam height and side orientation to
your convenience. Adjust both head-
lights evenly.
vmo2008-019-039_a
1. Adjustment screws
Taillight Bulb Replacement
To have access to bulb, pull on taillight
to release it from its rubber grommets.
vmo2008-019-040_a
Turn and pull light socket to expose
bulb.
vmo2008-001-006
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Reinstall all removed parts.
______________
MAINTENANCE PROCEDURES
121