Winch Remote Control (Xt Models) - BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual

CONTROLS/INSTRUMENTS/EQUIPMENT
BASIC GUIDE TO WINCHING
Refer to
TECHNIQUES
for proper operating in-
structions.
vmo2012-005-001_e
TYPICAL
1. Roll in
2. Roll out
25) Winch Remote Control
(XT Models)
A winch remote control is provided
with the vehicle to ease winch opera-
tion.
The winch remote control is located
underneath front service compartment
panel.
vmo2008-001-001_a
FRONT SERVICE COMPARTMENT
1. Winch remote control
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
______________
88
To use the winch remote control in-
stead of the handlebar control switch,
connect the remote control into the
provided connection.
vmo2012-005-007_a
1. Remote control connection
BASIC GUIDE TO WINCHING
Refer to
TECHNIQUES
about the winch.
NOTICE
store the remote control when not in
use.
WARNING
for more informations
Always disconnect and