BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 12

Table of Contents

Advertisement

SPECIAL SAFETY MESSAGES
– Never operate this vehicle on hills too steep for the vehicle or for your abilities.
Do not forget, with 2-UP models, the operator is responsible for the safety of
the passenger. In doubt, disembark him before climbing hill. Always remem-
ber that the vehicle handling, stability and braking distance may be affected
when riding with a passenger.
– Always follow proper procedures for climbing hills as described further in
this Operator's Guide. Check the terrain carefully before you start up any hill.
Never climb hills with excessively slippery or loose surfaces. Shift operator and
passenger (2-UP models) weight forward. Never open the throttle suddenly
or make sudden gear changes. Never go over the top of any hill at high speed.
If you are operating a 2-UP model, always keep in mind that you are carrying a
passenger.
– Always follow proper procedures for going down hills and for braking on hills as
described further in this Operator's Guide. Check the terrain carefully before
you start down any hill. Shift operator and passenger (2-UP models) weight
backward. Never go down a hill at high speed. Avoid going down a hill at an
angle that would cause the vehicle to lean sharply to one side. Go straight
down the hill where possible. If you are operating a 2-UP model, always keep
in mind that you are carrying a passenger.
– Always follow proper procedures for crossing the side of a hill as described
further in this Operator's Guide. Avoid hills with excessively slippery or loose
surfaces. Shift operator and passenger weight (2-UP models) to the uphill
side of the vehicle. Never attempt to turn the vehicle around on any hill until
you have mastered the turning technique described in this Operator's Guide
on level ground. Avoid crossing the side of a steep hill if possible. If you are
operating a 2-UP model, always keep in mind that you are carrying a passenger.
– Always use proper procedures if you stall or roll backwards when climbing a hill.
To avoid stalling, use proper gear and maintain a steady speed when climbing
a hill. If you stall or roll backwards, follow the special procedure for braking
described in this Operator's Guide. First, disembark the passenger (2-UP
models) then the operator. Dismount on the uphill side or to a side if pointed
straight uphill. Turn the vehicle around and remount, following the procedure
described further in this Operator's Guide.
– Always check for obstacles before operating in a new area. Never attempt to
operate over large obstacles, such as large rocks or fallen trees. Always follow
proper procedures when operating over obstacles as described further in this
Operator's Guide. Do not forget, with 2-UP models, the operator is responsible
for the safety of the passenger. In doubt, disembark him to get through the
obstacles.
– Always be careful when skidding or sliding. If you are operating a 2-UP model
and have a passenger onboard, never attempt skidding or sliding; overturn or
passenger ejection may occur. Learn to safely control skidding or sliding by
practicing at low speeds and on level smooth terrain. On extremely slippery
surfaces, such as ice, go slowly and be very cautious in order to reduce the
chance of skidding out of control.
_______
10
SAFETY INFORMATION
________

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am outlander max 400 efi 2014

Table of Contents