BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 108

MAINTENANCE PROCEDURES
vbs2009-012-015_a
TYPICAL - SPRAY THE FOAM ELEMENT
INSIDE AND OUT
2. Let stand for 3 minutes.
3. As stated on air filter cleaner (UNI)
container, rinse foam element with
plain water.
4. Dry the foam element completely.
vbs2009-012-005
TYPICAL - DRY
NOTE: A second application may be
necessary for heavily soiled elements.
Foam Filter Element Oiling
1. Spray AIR FILTER OIL (P/N 219 700
340) on the foam filter element pre-
viously dried.
______________
106
219700340
AIR FILTER OIL (P/N 219 700 340)
vbs2009-012-014_a
TYPICAL - OIL THE FOAM FILTER ELEMENT
2. Let stand for 3 to 5 minutes.
3. Remove any excess of oil that could
transfer to the paper filter by wrap-
ping the foam filter element into an
absorbent cloth and squeezing gen-
tly. This will also ensure a full oil cov-
erage on foam filter.
4. Reinstall the foam filter element
over the paper filter.
vbs2009-012-001
TYPICAL