BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 13

Table of Contents

Advertisement

– Never operate this vehicle in fast flowing water or in water deeper than that
specified in this Operator's Guide. Remember that wet brakes may have
reduced stopping ability. Test your brakes after leaving water, mud or snow.
If necessary, apply them several times to let friction dry out the pads. With
2-UP models, the vehicle braking distance may be affected when riding with a
passenger. Safely reduce speed when riding with a passenger. Allow greater
distance for braking.
– Always keep in mind that braking distance is readily affected by but not limited
to; weather and terrain conditions, braking system and tire conditions, vehicle
speed and attitude, and vehicle load including towing. Remember to adjust
your driving accordingly.
– Always be sure there are no obstacles or people behind the vehicle when you
operate in reverse. When it is safe to proceed in reverse, go slowly. Take into
account that on a 2-UP model the passenger can obstruct your view.
– BRP recommends sitting on your ATV when operating in reverse. Avoid stand-
ing up. Your weight could shift forward against the throttle lever causing an un-
expected acceleration and loss of control.
– Never exceed the stated load limits for this vehicle including operator and
passenger (2-UP models), all other loads and added accessories. Cargo should
be properly distributed and securely attached. Reduce speed and follow
instructions in this guide for carrying cargo or pulling a trailer. Allow greater
distance for braking.
– Always inspect and confirm the safe operating condition of your vehicle prior to
ride. Always follow the inspection and maintenance procedures and schedules
described in this Operator's Guide.
– Always use the tire size and type specified further in this Operator's Guide.
Always maintain proper tire pressure as described further in this Operator's
Guide.
– Never modify this vehicle through improper installation or use of accessories.
Only use BRP's approved accessories. NEVER install a passenger seat on a
1-UP model or use the racks to carry a passenger.
2-UP Models Only
Driver must:
– Inform the passenger concerning the basic rules for a safe ride.
– Instruct the passenger to read the vehicle's safety labels and to watch the
SAFETY DVD
– Not forget, the operator is responsible for the safety of the passenger. If in
doubt, disembark him before executing any maneuver. Always practice the
maneuvers described in this Operator's Guide without and with passenger.
Always remember that the vehicle handling, stability and braking distance may
be affected when riding with a passenger. Safely reduce speed when riding
with a passenger. Allow greater distance for braking. In some situations, this
vehicle can be used easily with the operator alone but not necessarily with a
passenger. Use your common sense.
– Never carry passenger on a 2-UP model if the storage box is installed (in place of
rear seat).
________
video.
SAFETY INFORMATION
SPECIAL SAFETY MESSAGES
________
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am outlander max 400 efi 2014

Table of Contents