BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 107

Table of Contents

Advertisement

vmo2008-019-019_a
1. Release clamps
Loosen clamp and remove air filter.
vmo2008-019-020_a
1. Clamp
2. Air filter
Remove foam filter element by care-
fully pulling it outwards.
vmo2009-008-039_a
TYPICAL
1. Foam filter element
2. Paper filter
Air Filter Cleaning and Oiling
CAUTION Always
propriate skin and eye protection.
Chemicals can cause a skin rash and
severe eye injury.
Paper Filter Cleaning
1. Ensure that the foam filter element
2. Tap out heavy dust from the paper
This will allow dirt and dust to get out of
the paper filter.
NOTE: Paper filter have a limited
life span; replace filter if too dirty or
clogged.
blow compressed air on the paper
filter; this could damage the paper
fibers and reduce its filtration ability
when used in dusty environments.
ter with any cleaning solution.
Foam Filter Element Cleaning
1. Spray the foam filter element inside
AIR FILTER CLEANER (P/N 219 700 341)
wear
ap-
______________
MAINTENANCE PROCEDURES
is removed from paper filter.
element.
NOTICE
It is not recommended to
NOTICE
Do not wash the paper fil-
and out with AIR FILTER CLEANER
(P/N 219 700 341).
219700341
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am outlander max 400 efi 2014

Table of Contents