BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 82

CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2008-001-020_i
1. Selector button
Tachometer
Measures engine revolutions per
minute (RPM). Multiply by 1000 to ob-
tain the actual revolutions.
NOTE: RPM can also be displayed via
Display 2 (mode) display. Refer to
PLAY 2 (MODE)
vmo2008-001-020_J
1. Tachometer
2. Operating range
3. Tachometer via display 2 (mode)
Transmission Position Display
This display will show transmission po-
sition.
______________
80
in this subsection.
vmo2008-001-020_p
1. Transmission position
DISPLAY
P
R
N
DIS-
NOTE: There is no message when a
forward gear is selected. If the letter
"E" is displayed in the transmission
position display, it means that there is
a electrical communication error. Con-
tact an authorized Can-Am dealer.
Fuel Level Display
Bar gauge that continuously indicates
the amount of fuel left in the fuel tank.
Also, an indicator lamp will indicate a
low-fuel condition as only one bar is
displayed.
FUNCTION
Park
Reverse
Neutral