BRP Can-Am OUTLANDER 400 EFI 2014 Operator's Manual page 116

MAINTENANCE PROCEDURES
vmo2008-019-026_a
1. Coolant drain plug
Disconnect the engine temperature
sensor connector.
vmo2008-019-027_a
1. Temperature sensor
2. Front of vehicle
Unscrew the bleeding screw on the
top of thermostat housing.
vmo2008-019-028_a
1. Bleeding screw
2. Engine temperature sensor
Drain the system completely.
Reinstall the coolant drain plug.
______________
114
COOLANT DRAIN PLUG TORQUE
10 N•m ± 1.2 N•m
(89 lbf•in ± 11 lbf•in)
vmo2008-019-026_a
1. Coolant drain plug
Pinch hose between radiator and ther-
mostat housing with a large hose
pincher or an equivalent.
NOTICE
Do not use vise-grip pliers
to pinch hose.
vmo2008-019-029_a
1. Coolant hose
2. Install hose pincher here
Fill the radiator until the coolant comes
out by the thermostat housing hole.