Mitsubishi Electric Y Series Manual page 204

CENTRALISED REMOTE CONTROLLER
204
Centralised Controller
Dimensions: 209(W) x 172(H) x 92(D) mm
: 8-1/4(W) x 6-25/32(H) x 3-5/8(D) in.
• System structure
System diagram (standard)
HUB
AE-200E
LAN
EW-50E
EW-50E
EW-50E
* When the AE-200E M-NET is not used, a maximum of four EW-50E units can be connected.
• Air conditioner units can be operated and monitored independently using a PC
Even without an AE-200E controller, the EW-50E can operate and monitor air-conditioner units using browser software
Air conditioners can be operated and monitored remotely via the Internet. In addition, air conditioners in multiple buildings can
be collectively operated.
* 1. This operation has been confirmed on Internet Explorer 11, Edge, Google Chrome ver.83, and Safari13.
Microsoft® Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and other countries.
Google is a registered trademark of Google LLC.
Google Chrome is a registered trademark of Google LLC. in the U.S. and other countries.
Edge is a trademark or registered trademark of Microsoft Corporation in the U.S. and other countries.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and other countries.
Safari is a trademark or registered trademark of Apple Inc. in the U.S.
Company names and product names in this brochure may be trademarks or registered trademarks of the respective rights holder.
* 2. When connecting an EW-50E via the Internet, do not connect the EW-50E directly to the Internet. Instead, always connect via a router using the
VPN function to ensure security.
LAN cable
Web display
Dual Dual
Set Set
Point Point
EW-50E
Max. Max.
M-NET M-NET
50 50
indoor indoor
units units
Max. Max.
M-NET M-NET
50 50
indoor indoor
units units
Max. Max.
M-NET M-NET
50 50
indoor indoor
units units units
Max.
M-NET M-NET
50
indoor
units
*2
Switching hub
Wi-Fi
Wireless LAN
Smartphone
• Main Features
Can be used as an expansion controller for the AE-200E
Up to 200 indoor units can be operated and monitored by connecting
three EW-50E units to an AE-200E controller.
Apportionment of electricity charges
The power consumption of each air conditioner can be calculated
with an AE-200E controller. The calculated data can be output to a
PC via a USB memory device or LAN, and billing charges can be
prepared using a specific charge calculation tool.
*The function to apportion electricity charge requires the use of both the
AE-200E and EW-50E.
*For other restrictions, refer to the Installation Manual and Instruction Book.
System diagram (with charge setting)
Charge calculation
Tool
HUB
LAN
LAN
USB
export
Total
200
indoor
units
AE-200E
M-NET
Tablet
EW-50E
EW-50E
Max.
M-NET
50 50
indoor indoor
units units
WHM
Pulse detector
PI controller
EW-50E
Max.
M-NET M-NET M-NET
50 50
indoor indoor indoor
units units
WHM WHM
Pulse detector Pulse detector
PI controller
EW-50E
Max.
M-NET M-NET M-NET
50 50
indoor indoor indoor
units units
WHM WHM
Pulse detector Pulse detector
PI controller
EW-50E
Max.
M-NET M-NET
50
indoor
units
WHM WHM
Pulse detector Pulse detector
PI controller
M-NET
Total Total
200 200
indoor indoor
units units
.
*1