Mitsubishi Electric Y Series Manual page 41

Optional parts
• For Y-Series
Description
Panel heater kit *1
Twinning kit
Branch pipe (Joint)
Branch pipe (Header)
Fin Guard
*1. If there is a risk that the drain water will freeze inside the outdoor unit, the installation of a panel heater is recommended.
For details, refer to the installation manual for the panel heater.
Model
PAC-PH01EHY-E For S module
PAC-PH02EHY-E For L module
PAC-PH03EHY-E For XL module
CMY-Y100VBK3 For PUHY-(E)P400-(E)P650YSNW-A1
CMY-Y200VBK2 For PUHY-(E)P700-(E)P900YSNW-A1
CMY-Y300VBK3 For PUHY-(E)P950-(E)P1350YSNW-A1
CMY-Y102SS-G2 200 or below(Total capacity of indoor unit)
CMY-Y102LS-G2 201-400(Total capacity of indoor unit)
CMY-Y202S-G2 401-650(Total capacity of indoor unit)
CMY-Y302S-G2 651-above(Total capacity of indoor unit)
CMY-Y104-G For 4 branches
CMY-Y108-G For 8 branches
CMY-Y1010-G For 10 branches
PAC-FG01S-E For side surfaces of S and L modules (a set of two pieces)
PAC-FG02S-E For side surfaces of XL modules (a set of two pieces)
PAC-FG01B-E For rear surface of S module
PAC-FG02B-E For rear surface of L module (a set of two pieces)
PAC-FG03B-E For rear surface of XL module (a set of two pieces)
SPECIFICATIONS
Remarks
41