Mitsubishi Electric Y Series Manual page 196

INDIVIDUAL REMOTE CONTROLLER
196
Wired MA Remote Controller
Dimensions: 120(W) x 120(H) x 14.5(D) mm
: 4-23/32(W) x 4-23/32(H) x 37/64(D) in.
• Example of system configuration
M-NET
MA remote controller
*When a PAR-40MAA is connected to a group, no other MA remote controllers can be
connected to the same group.
• Functions
Item
ON/OFF
Operation mode switching
Temperature setting
Air flow direction setting
Louver setting
Ventilation equipment control
Error information
Timer
Allows/disallows local operation
Operation lock
Temperature range restriction
Auto return
Daylight saving time
PAR-40MAA
Non-polarized
Non-polarized 2-wire
2-wire
MA remote controller
Switches between ON and OFF.
Switches between Cool/Dry/Fan/Auto/Heat.
Changes the set temperature.
* Set temperature range varies depending on the indoor unit model.
Changes airflow direction.
* Available airflow directions vary depending on the model.
Switches between louver ON/OFF.
Interlocked setting and interlocked operation setting with CITY MULTI Lossnay units can be performed.
The Stop/Low/High settings of the ventilation equipment can be controlled.
When an error occurs, an error code and the unit address appear.
The air-conditioning unit model, serial number, and contact number can be set to appear when an error occurs.
(The above information needs to be entered in advance.)
* An error code may not appear depending on the error.
ON/OFF timer
Turns ON and OFF daily at a set time.
• Time can be set in 5-minute increments. • It is also possible to set the ON time only or the OFF time only.
Auto-OFF timer
Turns off the unit after a certain period of operation.
• Operation time can be set to a value from 30 to 240 minutes in 10-minute increments.
The following operation can be prohibited by applying certain settings on the centralized controller: ON/OFF,
operation mode, set temperature, filter sign reset, air direction, fan speed and timer.
* While an operation is prohibited, the operation icon lights up (only on the Main display in the "Full" mode).
The following operations can be prohibited:
"Location," "On/Off," "Mode," "Set temp.," "Menu," "Fan," "Louver," or "Vane."
The room temperature range for each operation mode can be restricted.
The units operate at the preset temperature after a designated period.
(Time can be set to a value from 30 to 120 minutes in 10-minute increments.)
* Not valid when the temperature setting range is restricted.
The start/end time for daylight saving time can be set. The daylight saving time function will be activated based on the
setting contents.
• Slim design
Compared to the previous
remote controller
(PAR-32/33MAA), the
latest controller is slimmer
by 4.5 mm (depth),
allowing for more flexible
installation.
• Backlit LCD (Liquid Crystal Display)
Large, easy-to-see display.
Full-dot LCD display with large characters for easy viewing.
Contrast can also be adjusted.
• Night setback
When the room temperature goes outside a certain range
during a prespecified time period, heating or cooling operation
is automatically activated to prevent dew condensation or an
excessive temperature increase in the room.
• Language selection
The screen display language can be selected from 14
languages:
English, French, Spanish, Italian, Portuguese, Greek, Turkish,
Swedish, German, Dutch, Russian, Czech, Hungarian, and
Polish.
• 3D i-see Sensor*
Settings can be made for the 3D i-see Sensor.
• Draft reduction*
"Close" has been added to the manual vane angle selection.
The air outlet can be closed to reduce drafts from the air
conditioner.
• Auto descending panel*
Panels can be lowered/raised using the remote controller.
Panel position can also be selected from a number of
patterns.
*Availability of the function depends on the indoor unit model. Contact your
local distributor for details.
Description
19
(mm)
14.5
PAR-32/33MAA
PAR-40MAA
-4.5 mm
: Each group : Not available
Operations Display
─
X
X