Mitsubishi Electric Y Series Manual page 200

CENTRALISED REMOTE CONTROLLER
200
Advanced Touch Controller
Advanced Touch Controller AT-50B ensures easy and simple operation on the touch panel to offer an
optimal air environment by each unit.
Dimensions: 180(W) x 120(H) x 30(D) mm
: 7-2/16(W) x 4-3/4(H) x 1-3/16(D) in.
• System structure
1
AT-50B
Backlit LCD touch panel
A 5-inch color LCD (Liquid Crystal Display) touch panel enables easy and simple operation.
When the backlight is off, touching the panel turns it back on.
The touch panel displays the operation status of the units in GRID, LIST or GROUP form.
AT-50B
M-NET M-NET
Power supply unit
PAC-SC51KUA-J
General equipment
DIDO controller
Lossnay
GRID (zoom out) screen
Displays the operation status
of all groups.
LIST screen
Displays the operation status
details of each group
by group name.
• The color touch panel is easy to see and operate.
Dual Dual
Set Set
The operation screen can be selected according to the
Point Point
intended use.
• Dual set point
When the operation mode is set to Auto (dual set point)
mode, two preset temperatures (one each for cooling and
heating) can be set. Depending on the room temperature,
the indoor unit will automatically operate in either the Cool
or Heat mode and keep the room temperature within the
preset range.
*Contact your Mitsubishi Electric sales office for details.
• Operation pattern during Auto (dual set point) mode
Preset temp.
(COOL)
M-NET
adapter
Preset temp.
(HEAT)
A control
The room temperature
changes in accordance
with changes in the
outside temperature.
HEAT COOL HEAT
GRID (zoom in) screen
Displays the operation
status details of each group.
GROUP screen
Displays the operation
status details of each group.
Sets group operations.
Room
temperature
COOL