Mitsubishi Electric Y Series Manual page 235

PAR-W21MAA Specifications
[CAHV-P500YB-HPB]
Item
ON/OFF Runs and stops the operation of a group of units
Operation mode switching Switches between Hot Water / Heating / Heating ECO / Anti-freeze / Cooling
* Available operation modes vary depending on the unit to be connected.
* Switching limit setting can be made via a remote controller.
Water temperature setting
Temperature can be set within the ranges below. (in increments of 1°C or 1°F)
Hot Water
Heating
Heating ECO
Anti-freeze
* The settable range varies depending on the unit to be connected.
Water temperature display 10°C ~ 90°C
(in increments of 1°C or 1°F)
* The settable range varies depending on the unit to be connected.
Permit / Prohibit
Individually prohibits operations of each local remote control function :ON/OFF,
local operation Operation modes,water temperature setting, Circulating water replacement warning reset.
* Upper level controller may not be connected depending on the unit to be connected.
Weekly scheduler ON / OFF / Water temperature setting can be done up to 6 times one day in the week.
(in increments of a minute)
Error
When an error is currently occurring on a unit, the afflicted unit and the error code are
displayed.
Self check (Error history)
Searches the latest error history by pressing the CHECK button twice.
Test run
Enables the Test run mode by pressing the TEST button twice.
* Test run mode is not available depending on the unit to be connected.
LANGUAGE setting The language on the dot matrix LCD can be changed. (Seven languages)
English/German/Spanish/Russian/Italian/French/Swedish
Operation locking function
Remote controller operation can be locked or unlocked.
• All-switch locking
• Locking except ON/OFF switch
[CRHV-P600YA-HPB]
Item
ON/OFF Runs and stops the operation of a group of units
Operation mode switching Switches between Hot Water / Heating / Heating ECO / Anti-freeze
* Available operation modes vary depending on the unit to be connected.
* Switching limit setting can be made via a remote controller.
Water temperature setting
Temperature can be set within the ranges below. (in increments of 1°C or 1°F)
Hot Water
Heating
Heating ECO
Anti-freeze
* The settable range varies depending on the unit to be connected.
Water temperature display
10°C ~ 90°C
(in increments of 1°C or 1°F)
* The settable range varies depending on the unit to be connected.
Permit / Prohibit Individually prohibits operations of each local remote control function :ON/OFF,
local operation Operation modes,water temperature setting, Circulating water replacement warning reset.
* Upper level controller may not be connected depending on the unit to be connected.
Weekly scheduler ON / OFF / Water temperature setting can be done up to 6 times one day in the week.
(in increments of a minute)
Error
When an error is currently occurring on a unit, the afflicted unit and the error code are
displayed.
Self check (Error history)
Searches the latest error history by pressing the CHECK button twice.
Test run Enables the Test run mode by pressing the TEST button twice.
* Test run mode is not available depending on the unit to be connected.
LANGUAGE setting The language on the dot matrix LCD can be changed. (Seven languages)
English/German/Spanish/Russian/Italian/French/Swedish
Operation locking function
Remote controller operation can be locked or unlocked.
• All-switch locking
• Locking except ON/OFF switch
Description
25°C ~ 70°C
25°C ~ 55°C
30°C ~ 45°C
25°C
Description
30°C ~ 65°C
30°C ~ 45°C
30°C ~ 45°C
30°C
SPECIFICATIONS
235
Operations Display
Operations Display